CHETRATEX ®
ePTFE flat sealing tape
Joint sealant, with adhesive back for universal flange sealing in all industrial areas
Economical flat sealing tape made of high-quality ePTFE (stretched, expanded material)
Handy & easy to install: no punching out, directly from the roll: round, square, longitudinal, uneven
Universally applicable as static flat gasket in almost all areas, e.g. heat exchangers, pipelines/flanges, columns, housings – for steel flange, smooth or with tongue and groove – for oxygen lines in copper/copper alloys (see BAM approval)
Due to the good formability especially suitable for FRP and plastic flanges, glass/graphite apparatus, sight glasses, ceramic flanges
Spezifikationen:
- Rolls of 10, 25, 50 m
- Dimensions (width x height unpressed):
- 3×1.5; 5×2; 7×2.5; 10×3; 14×5; 17×6; 20×7 mm
- (Special dimensions on request)
Zulassungen & Zertifizierungen
TÜV tested, BAM tested (up to oxygen pressures of 100 bar and 90° C)
Technische Spezifikationen
pmax: 220 bar (depending on installation conditions)
pmax (oxygen): 100 bar
pmax (gas supply): 16 bar
t: -240° C. to +280° C (310° C for short periods)
t (gas supply): -10° C to +50° C
pH: 0 – 14 (except for molten or dissolved alkali metals and elemental fluorine)
Entspricht
FDA, DIN2501